To: | topband@contesting.com |
---|---|
Subject: | Topband: 160 ground plane choke |
From: | Cqtestk4xs--- via Topband <topband@contesting.com> |
Reply-to: | Cqtestk4xs@aol.com |
Date: | Sat, 27 Sep 2014 09:50:03 -0400 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
I've been using a 160 GP with 4 radials. It's a Tee-top supported with a rope between two towers, with the top around 165 feet and the base at 70 feet. I'm feeding it with RG8X to keep the weight down on the rope which supports it. Although it works well I would like to negate any loading which might be taking place on the feed line which drops from straight down from the base. Any ideas for a cheap, easily made, effective choke on the feedline? Bill K4XS/KH7XS _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Matching network info for 80 & 160M needed, Dan Maguire via Topband |
---|---|
Next by Date: | Re: Topband: 160 ground plane choke, Carl |
Previous by Thread: | Topband: Fw: Remote pre-amp power source, k1fz |
Next by Thread: | Re: Topband: 160 ground plane choke, Carl |
Indexes: | [Date] [Thread] [Top] [All Lists] |