Hi Gary,
there was an article in recent issue of ARRL QST, A 20 and 40 meter Vertical
on "Autopilot",
from QST september 2005 by Dan Richardson, K6MHE...same article ended up in
ARRL"
" More vertical Antenna Classics :)
Use heavy duty compononets, treat 160 m vertical as 1/4 lambda and 80 meters
as
1/2 lambda...let us know :)
You might have followeres..
Kr Nermin S58DX
----- Original Message -----
From: "Gary Marks" <gmarks@neo.rr.com>
To: "Topband" <topband@contesting.com>
Sent: Monday, September 22, 2014 6:48 PM
Subject: Topband: Matching network info for 80 & 160M needed
I have an Inverted-L antenna for 80M & 160M and would like to make or buy a
remote matching system that would work on both ends of both bands that
would accept full power.
I built a system many years ago from a Doug DeMaw, W1FB, article in the
May 1985 issue of QST but it has never worked as well as I wanted for
whatever reason.
If anyone is interested, this article can be found at the ARRL QST
archives http://www.arrl.org/arrl-periodicals-archive-search by entering
W1FB , 1985, May, QST.
Anyone have an idea of a matching system that would do all of the above ?
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|