How is inteference on rotor or relay boxes?I thinking 1kw generate magnetic
radiation into cables ??? How u solve this guys ?? Tnx
---Sent by iphoneLB3RE LJ3RE K3RAG ex: LA6FJAwww.lb3re.com ~ Rag ~ Stein Roar
Brobakken e-mail:post@lb3re.comhttp://la5o.wordpress.comwww.contesting.no
Reading about 3-wire cages and the like, I feel a serious case of shunt
envy. Mine is a single wire about 18 inches from one corner of my Rohn
25, connected to the tower at about 50 feet. I used an omega match with
a couple of 3 KV transmitting variables, because my tower is quite tall
for 160 (97 feet with 3 yagis, 2 on top) and I could not find a 50-ohm
point.It was absurdly easy to adjust and seems to work quite well at 100
watts. I'm sure there are better solutions (including Herb's), but this
was really simple.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 8/26/2014 5:12 PM, Don wrote:
> I would like to get on 160 this question most likely has been asked a 1000
> time but I need information as how or can I shunt feed my 55 ft rohn 45 .
>
> Don
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|