Have a look on ebay - rx splitter .
http://www.ebay.com/itm/ANTENNA-SPLITTER-COMBINER-RX-HF-1-50-MHz-SO-239-conn
ectors-/321217220222?pt=US_Radio_Comm_Antennas&hash=item4aca09ce7e
>> On 3/13/2014 9:13 PM, Gary K9GS wrote:
>>> Can anyone point me to a design for a splitter for sharing a Beverage
>>> antenna between two receivers? This is for Field Day so these are not
>>> optimized Beverages by any means.
>>>
>>> Just want to allow the 80/40M stations to share antennas. Nothing fancy.
>>>
>>> My thoughts are to just use a CATV "2-Way" splitter at the output of the
>>> Beverage matching transformer and run separate feed-lines to each radio.
>>> I'm pretty sure these things work down to 1 MHz but have not measured
>>> them. I can use the pre-amp in the radio (K3) to compensate for the
>>> loss.
>>>
>>> Thoughts?
>>>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|