Topband
[Top] [All Lists]

Re: Topband: NQ4I

To: "John Harden, D.M.D." <jhdmd@bellsouth.net>, topband <topband@contesting.com>
Subject: Re: Topband: NQ4I
From: Mike Waters <mikewate@gmail.com>
Date: Thu, 13 Feb 2014 16:38:38 -0600
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Need heaters inside the elements, at least towards the ends, that can be
turned on to melt the ice.

Where there's a will, there's a way to do that.

73, Mike
www.w0btu.com


On Thu, Feb 13, 2014 at 2:51 PM, John Harden, D.M.D. <jhdmd@bellsouth.net>wrote:

> Hi all...well the antennas are starting to give up...so far I have
>> lost the top 40m KLM 4 el at 155 ft that is used for the MULT
>> station...it is dangling from the top of the tower..next to go will be
>> the 3 el Telrex 40m RUN top antenna...also ready to fold up is the
>> monster 8 el homebrew 8 el 20m on 89 ft boom...not looking good either
>> is the top 8 el 15m RUN antenna at 155 ft...I might very well lose the
>> rest of the antennas tonight...it is raining and ice pellets and the
>> loads keep increasing on the antennas...we had planed to operate in
>> the ARRL CW this coming weekend...not sure if there will be any
>> antennas left...tomorrow morning will end the storm around 11
>> am..temps are forecast to rise to 34 degrees F and maybe some melting
>> will tke place.
>>
>> de Rick NQ4I
>>
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Topband: NQ4I, Mike Waters <=