Topband
[Top] [All Lists]

Re: Topband: WD1A wire

To: topband@contesting.com
Subject: Re: Topband: WD1A wire
From: Henk PA5KT <pa5kt@remijn.net>
Date: Fri, 30 Aug 2013 15:20:04 +0200
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Search for Feldkabel on ebay.de. Most sellers also ship to rest of Europe.

73 Henk PA5KT

Op 8/29/2013 7:28 PM, ct1ilt@sapo.pt schreef:
Hi

  I am also interested in any european source :)

  Very hard to find this wire

  Filipe CT1ILT F4VPX

Quoting Neil G0JHC <g0jhc@blueyonder.co.uk>:
Those are all very good prices from NA.
Here in the UK, the only source I found was Army Surplus, the best deal was
  $85 for 2000ft spools + $15 shipping.

  Anyone have any cheaper sources in the UK?

  Neil G0JHC


  -----Original Message-----
  From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of
topband-request@contesting.com
  Sent: 29 August 2013 17:00
  To: topband@contesting.com
  Subject: Topband Digest, Vol 128, Issue 31

  Send Topband mailing list submissions to
          topband@contesting.com

  To subscribe or unsubscribe via the World Wide Web, visit
          http://lists.contesting.com/mailman/listinfo/topband
  or, via email, send a message with subject or body 'help' to
          topband-request@contesting.com

  You can reach the person managing the list at
          topband-owner@contesting.com

When replying, please edit your Subject line so it is more specific than
  "Re: Contents of Topband digest..."


  Today's Topics:

    1. WD1A wire (Larry Molitor)
    2. Re: WD1A wire (Herb Schoenbohm)
    3. Re: WD1A wire (Larry Molitor)
    4. Re: data follow up to W4ZV and K2AV comments (Tim Duffy)
    5. Spiderbeam mast UV Resistance? (Jim Garland)
    6. Re: WD1A wire (ZR)


----------------------------------------------------------------------

  Message: 1
  Date: Wed, 28 Aug 2013 12:32:07 -0700 (PDT)
  From: Larry Molitor <w7iuv@yahoo.com>
  To: "topband@contesting.com" <topband@contesting.com>
  Subject: Topband: WD1A wire
  Message-ID: <1377718327.441.YahooMailNeo@web126202.mail.ne1.yahoo.com>
  Content-Type: text/plain; charset=us-ascii

  Anyone know of a good source for WD1A field phone wire these days?

Best I've found so far runs abut 60 bux shipped to WA for a 0.5 km spool.

  Thanks,

  Larry - W7IUV

  ------------------------------

  Message: 2
  Date: Wed, 28 Aug 2013 15:58:02 -0400
  From: Herb Schoenbohm <herbs@vitelcom.net>
  To: topband@contesting.com
  Subject: Re: Topband: WD1A wire
  Message-ID: <521E564A.6050404@vitelcom.net>
  Content-Type: text/plain; charset=ISO-8859-1; format=flowed





Larry try eBay that is where I bought my last 2500 feet for 28 bucks but be
  sure to not get it tangled as that is a mess or long runs.


  Herb Schoenbohm, KV4FZ



On 8/28/2013 3:32 PM, Larry Molitor wrote: > Anyone know of a good source for WD1A field phone wire these days?

Best I've found so far runs abut 60 bux shipped to WA for a 0.5 km spool.

   Thanks,

   Larry - W7IUV
   _________________
   Topband Reflector
  ------------------------------

  Message: 3
  Date: Wed, 28 Aug 2013 13:53:54 -0700 (PDT)
  From: Larry Molitor <w7iuv@yahoo.com>
  To: ZR <zr@jeremy.mv.com>, "topband@contesting.com"
          <topband@contesting.com>
  Subject: Re: Topband: WD1A wire
  Message-ID:
<1377723234.85498.YahooMailNeo@web126206.mail.ne1.yahoo.com>
  Content-Type: text/plain; charset=iso-8859-1

  Thanks Carl, even though it wasn't much help.

Need some new wire for some BOG experiments, mostly for 630 meters. Ran outa cheap insulated wire. Considering cat5 because it's cheaper than any single conductor wire you can buy. But WD1A ?is not as appetizing to the varmits
  and in my old age, I really hate splicing wire in the snow.

Anybody even run bare wire on the ground? I tried that when I was in AZ and it didn't work but the soil at that location was very very good. Maybe it
  would work here over frozen sand and rock?

  Larry - W7IUV



  ________________________________
  From: ZR <zr@jeremy.mv.com>
  To: Larry Molitor <w7iuv@yahoo.com>; topband@contesting.com
  Sent: Wednesday, August 28, 2013 1:26 PM
  Subject: Re: Topband: WD1A wire


The last reel I bought was 2.5km for $40 plus about $20 shipping from Ohio about 3-4 years ago on Fleabay. It was listed strangely but I forget how; I believe I searched for "military wire" or something similar. I see some
  speculators peddling it at .10/ft

  Carl
  KM1H


  ----- Original Message -----
  From: "Larry Molitor" <w7iuv@yahoo.com>
  To: <topband@contesting.com>
  Sent: Wednesday, August 28, 2013 3:32 PM
  Subject: Topband: WD1A wire

Anyone know of a good source for WD1A field phone wire these days?

Best I've found so far runs abut 60 bux shipped to WA for a 0.5 km spool.

   Thanks,

   Larry - W7IUV
   _________________
   Topband Reflector


   -----
   No virus found in this message.
   Checked by AVG - www.avg.com[1]
Version: 10.0.1432 / Virus Database: 3211/6115 - Release Date: 08/28/13
  ------------------------------

  Message: 4
  Date: Wed, 28 Aug 2013 22:02:07 -0400
  From: "Tim Duffy" <k3lr@k3lr.com>
  To: "'Bill Tippett'" <btippett@alum.mit.edu>, <topband@contesting.com>
  Subject: Re: Topband: data follow up to W4ZV and K2AV comments
  Message-ID: <4E27EE2D50804B1B96D1EF8096DF3837@laptop>
  Content-Type: text/plain;        charset="us-ascii"

  For the record:

  40 meter antennas at W3LPL:
  Two full size 3 ele Yagi's at 190 feet over 100 feet - 48 foot booms.

  40 meter antennas at K3LR
Three full size 4 ele OWA Yagi's at 260 feet over 190 feet over 118 feet.
  48 foot booms. 7 take off angle combinations are available.

  QSOs for 40 meters in this contest:

  K3LR 1767 Europe and 144 Asia
  W3LPL 1686 Europe and 122 Asia

  73,
  Tim K3LR

  -----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Bill
  Tippett
  Sent: Wednesday, August 28, 2013 6:17 AM
  To: topband@contesting.com
  Subject: Re: Topband: Effect of trees- tree appreciation

          Long delayed response to

http://lists.contesting.com/pipermail/topband/2013-August/041954.html

  K2AV wrote:

  "By common
  expectation LPL and LR should have a propagation advantage over NY4A.
  LPL and LR both have excellent stacked 3 or 4 element 40m yagi's. But
  note how as the fourth mode is engaged, both LR and LPL fall off
  because they are not cleanly engaging the mode, most likely because
  the increasing elevation angle is starting into a notch in the yagi
  vertical pattern.  Also note that NY4A carries the best signal for
  most of the 24 hours. This is an evaluation of the NY4A 40 EU quad vs.
  known excellent installations that is hard to argue with."

  From the ARRL results database, sorted by maximum 40m QSOs (after
  log-checking):

http://bit.ly/19YAF1f  don't worry Frank...it's OK  :-)

  Rank            Call            40m QSOs

  1.              K3LR            2000
  2.              W3LPL           1911
  3.              WE3C            1862
  4.              KM1W            1818
  5.              NY4A            1809

  K3LR could be expected to have a higher total because of better prop
  to JA but the other 4 should have had similar propagation to EU,
  which would dominate their results.  There's more to this story than
  RBN spots from a single location shows.

  73,  Bill  W4ZV


  _________________
  Topband Reflector



  ------------------------------

  Message: 5
  Date: Thu, 29 Aug 2013 06:14:05 -0600
  From: "Jim Garland" <4cx250b@miamioh.edu>
  To: <Topband@contesting.com>
  Subject: Topband: Spiderbeam mast UV Resistance?
  Message-ID: <0bb001cea4b1$42154560$c63fd020$@miamioh.edu>
  Content-Type: text/plain;        charset="us-ascii"

My 26m Spiderbeam mast is made of a shiny black fiberglass material. Have users of this or the shorter Spiderbeam masts had experience with how well the masts hold up to UV radiation? My QTH is at 7000 ft elevation and the sun shines 330 days/year, so UV degradation is a big problem. I've used Krylon UV-resistant spray on my SteppIR yagi and it didn't seem to help at all. I've heard that a water-based urethane paint works well, but don't know if it would bond to the Spiderbeam mast. Also, the top of the mast is very flexible and thin, so the weight of the paint might also be a problem. Any
  suggestions?

  73,

  Jim W8ZR



  ------------------------------

  Message: 6
  Date: Wed, 28 Aug 2013 16:26:48 -0400
  From: "ZR" <zr@jeremy.mv.com>
  To: "Larry Molitor" <w7iuv@yahoo.com>, <topband@contesting.com>
  Subject: Re: Topband: WD1A wire
  Message-ID: <A0900C5DFF784AECA24C7D3EC9E30A07@computer1>
  Content-Type: text/plain; format=flowed; charset="iso-8859-1";
          reply-type=original

The last reel I bought was 2.5km for $40 plus about $20 shipping from Ohio about 3-4 years ago on Fleabay. It was listed strangely but I forget how; I believe I searched for "military wire" or something similar. I see some
  speculators peddling it at .10/ft

  Carl
  KM1H


  ----- Original Message -----
  From: "Larry Molitor" <w7iuv@yahoo.com>
  To: <topband@contesting.com>
  Sent: Wednesday, August 28, 2013 3:32 PM
  Subject: Topband: WD1A wire

Anyone know of a good source for WD1A field phone wire these days?

Best I've found so far runs abut 60 bux shipped to WA for a 0.5 km spool.

   Thanks,

   Larry - W7IUV
   _________________
   Topband Reflector


   -----
   No virus found in this message.
   Checked by AVG - www.avg.com[1]
Version: 10.0.1432 / Virus Database: 3211/6115 - Release Date: 08/28/13
  ------------------------------

  Subject: Digest Footer

  _______________________________________________
  Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband


  ------------------------------

  End of Topband Digest, Vol 128, Issue 31
  ****************************************


  -----
  No virus found in this message.
  Checked by AVG - www.avg.com[1]
Version: 2013.0.3392 / Virus Database: 3211/6618 - Release Date: 08/28/13

  _________________Topband Reflector




Ligações:
---------
[1] <a href="http://www.avg.com";> http://www.avg.com</a>
_________________
Topband Reflector


_________________
Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>