Topband
[Top] [All Lists]

Topband: Phase and Polarity -- They are Very Different

To: no3m@no3m.net, 'TopBand' <topband@contesting.com>
Subject: Topband: Phase and Polarity -- They are Very Different
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Mon, 04 Feb 2013 19:06:56 -0800
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On 2/3/2013 10:55 PM, Eric NO3M wrote:
also the phase inverter

At the risk of being a PTA, let me remind all that phase is a continuously variable quantity that is directly related to frequency and time. It cannot be "inverted" or "reversed."

There is another parameter called "polarity," and it can be inverted by reversing the wiring in a circuit (often using a two-winding transformer), or by running through an inverting amplifier. Polarity does not vary with frequency.

In the old days, when almost everyone here also used the word "phase" to describe both things, but they are very different. That's unfortunate, because it leads to most of us failing to realize that simply reversing polarity in a transformer makes the cancellation not sensitive to frequency, while cancellation produced by a half wavelength of transmission line will be sensitive to frequency. Further, the half-wave line will act as a resonant circuit, and can, in many situations, be used to behave in a manner that it compensates for resonance in an antenna.

The late Dick Heyser, a scientist at JPL and inventor of Time Delay Sprectrometry, introduced those of us in the pro audio world to this difference back in the 70s, and it helped us understand some rather complex acoustic relationships. It is equally important in the RF world, and it is very important in the design of any directional antenna system.

73, Jim K9YC.
_________________
Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>