CU on the 525 foot band, Carl? Seriously, I suspect that the reason why
many of us work in meters when modeling is simply that some of the most
useful software products default to that.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 11/14/2012 3:48 PM, ZR wrote:
I cant find the button to convert that metric stuff to good old USA
measurements when posted from this country(-:
Subject: Re: Topband: Vertical Array Over Uneven Ground
I never found a way to model an an antenna over anything but flat, level
ground. Not in EZNEC+ 5.0, anyway.
73, Mike
www.w0btu.com
On Tue, Nov 13, 2012 at 7:41 PM, Ken Claerbout <k4zw@verizon.net> wrote:
Has anyone modeled or have experience with a transmit vertical
array, say
a 4-square, over uneven ground? By uneven I mean a variance of up to
2 - 3
meters over the footprint of the array elements.
_______________________________________________
Topband reflector - topband@contesting.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1427 / Virus Database: 2441/5394 - Release Date: 11/14/12
_______________________________________________
Topband reflector - topband@contesting.com
_______________________________________________
Topband reflector - topband@contesting.com
|