Topband
[Top] [All Lists]

Re: Topband: Home Depot LED bulb interference.

To: Wayne Mills <n7ng@bresnan.net>
Subject: Re: Topband: Home Depot LED bulb interference.
From: Trent Fleming <trent.fleming@gmail.com>
Date: Thu, 5 Apr 2012 16:43:34 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Off
Topic - heat is a real problem. Some even come with fins to
Dissipate heat. Wired mag had a great article about the new bulbs a few issues 
back, I'll see if I can find it. 

Trent
N4DTF

Sent from my iPhone

On Apr 5, 2012, at 12:32 PM, "Wayne Mills" <n7ng@bresnan.net> wrote:

> FWIW: for the last six weeks, I've been experimenting with three LED lamps,
> 40, 60 and 75 watts, Sylvania and UtilitechPro from Lowes and so far haven't
> noticed anything on Topband. I even disconnected the shield on the RX input
> this morning and still don't hear anything.
> 
> Wayne, N7NG
> 
> p.s. That 75 watt equivalent lamp seems to put out MORE than 60 watts of
> heat. It really gets hot.
> 
> -----Original Message-----
> From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
> On Behalf Of Jim F.
> Sent: Thursday, April 05, 2012 9:22 AM
> To: top Band
> Subject: Topband: Home Depot LED bulb interference.
> 
> 
> 
> 
> 
> 
>  
> I bought two  LED  40 watt equivalent 110V. light bulbs from Home Depot that
> use 
> only 9 watts of power, for $9.99 ea. 
>  
> They seemed like a good deal but cause noise interference on 160m and the FM
> radio band.
> (I did not try other bands.)
>  
> I like the bulbs but best use them away from your radio station and have
> someone turn them off and on while monitoring your favorite
> frequencies/bands.
>  
> 73,
>  
> jim / W1FMR
> _______________________________________________
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
> 
> 
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>