Topband: Bias Tee question

[Dave Kirk <w6mqi@yahoo.com>]

I’m designing a multi element receive array which
incorporates the usual  0 deg hybrid
combiner, 180 deg phase inverter, and 2:1 transformer. I’m going to use pre
amps on the antenna elements and need to supply 12 volts to them via the feed
lines through a bias tee. My question is do I need to worry about 12v being fed
back through the combiner, phase inverter, or 2:1 transformer to my receiver 
even
though their not physically connected or should I put .01  cap on the feed line 
going the my receiver for
safety.
 
 
Thanks Dave.
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK