Rick,
For the HPF option, see this:
http://www.ac0c.com/main/page_antennas__homebrew_clifton_labs_z10022a.html
73, Jeff ACØC
www.ac0c.com
-----Original Message-----
From: rick darwicki
Sent: Tuesday, September 13, 2011 9:42 PM
To: Group Topband
Cc: Group RFI
Subject: [RFI] BCB interference on 160
Hi all,
I recently built a sheilded RX loop for 160 per N6RKs Contest Jouranal artical.
It is diode tuned and covers about 1.5-4 mhz. I am
hearing two AM radio stations on 1830 khz.
They are 640 and 1190 combined. 640 is a 50KW station about 12 miles east and
1190 runs about 1.5 kw at night.
The anetnna is all sealed up and on the roof. I would like to cure the problem
without changing to back to back tuning diodes.
I'm thinking a series trap tuned to 1190 or 640 or both. Maybe a high pass
filter.
Any suggestions? I can built it, I don't want to spent $200 for the W3s
highpass hi hi
Thanks,
Rick, N6PE
=============================================================================
If I agreed with you we'd both be wrong.
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|