Did you try heavy common-mode choking? I am using an 8-foot Clifton
Engineering active antenna on over 200 feet of feedline, and find that
10 turns of RG-58 on a big Type 31 core, placed at each end of the
feedline, make all the difference.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000
On 7/10/2011 3:43 PM, Richard (Rick) Karlquist wrote:
> I tried one of those, but the isolation from the feedline
> was insufficient, so the feedline became the antenna.
> The problem is that the feedline is a vertical "antenna"
> and produces a whopping signal that is actually higher
> that the signal from the antenna itself.
>
> Rick N6RK
>
> On 7/10/2011 9:13 AM, vtnn43e@comcast.net wrote:
>>
>> I was wondering if anyone on the list uses a DX Engineering DXE-ARAH2-1p
>> active dipole antenna and how well does it work on 160 and 80?
>>
>> 73
>>
>> Zack
>>
>> N8FNR
>>
>>
>> _______________________________________________
>> UR RST IS ... ... ..9 QSB QSB - hw? BK
>>
>>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|