Topband
[Top] [All Lists]

Topband: Beverage Feed Line Choke Installation

To: topband@contesting.com
Subject: Topband: Beverage Feed Line Choke Installation
From: Bill Tippett <btippett@alum.mit.edu>
Date: Mon, 01 Jun 2009 08:48:14 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
N4ZR:
 > I understand that low-output RX antennas like flags, pennants, and
various loops need more common mode suppression than Beverages.  I
wonder if two of those chokes, with a ground in between, 10-15 feet
from the matching transformer, would be a satisfactory design.

         I doubt it.  I believe the choke needs to be as close to
the feedpoint as possible.  Carlos N4IS is very knowledgeable about
flags and uses 14 turns of RG-58 on a FT 244-77 toroid (or 14 turns
of RG-174 on FT 140-77) on his Waller Flags (two chokes).

http://www.n4is.com/wf/NEW_WF.html

                                 73,  Bill  W4ZV

_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>