>Hi Bill - If you care to repost but without my email address. FYI -
>Steve WB6RSE
>
>
>
>I use vac latching RF relays, Jennings RF4B.
>
>http://www.mgs4u.com/RF-Microwave/vacuum-relays-SPST.htm
>
>I use a 24V/2A transformer with a full wave bridge and a 10K bleeder
>and 1000 uF cap at the output and momentary switches to pulse the
>appropriate coil. Voltage drops to about 16 volts at the end of a 50
>ft cable at the relay winding when energized. They work well. I
>wanted latching relays to avoid a constantly energized state.
>
>Steve WB6RSE
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|