I recently added one of the MFJ 1025 boxes to the setup.
A K3LR tip set me in the right direction. Peak the noise, then use the 180
button to cancel it. I have found it is easy to cancel out S9+60dB ground
wave signals from broadcast stations below the 160m band. But, I've not had
any success with skywave signals. I still need to do more experimenting
though.
> Are there any other devices available that may be more appropriate for my
> situation?
DX Engineering has one coming out. Their web page says "Fall 06". On his
web page on the topic ( http://www.w8ji.com/mfj-1025_1026.htm ), W8JI
describes some differences in his design vs. the 1025 and I'm hoping those
make it into the DX Engineering model.
> Please reply to me directly to minimize the impact on the group
I wouldn't mind hearing about people's experiences with these devices also.
73,
Tom, NI1N
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|