Topband
[Top] [All Lists]

Re: Topband: KT34 & Shunt Feeding

To: w7my@yahoo.com, topband@contesting.com, towertalk@contesting.com
Subject: Re: Topband: KT34 & Shunt Feeding
From: Earl W Cunningham <k6se@juno.com>
Date: Sun, 28 Mar 2004 15:44:04 -0800
List-post: <mailto:topband@contesting.com>
Greg, W7MY wrote:

"You can strap all of the elements directly to the boom with no effect on
the KT-34xa; I had the same set-up a few QTH's back."
==========
Be prepared to retune your 160-meter shunt feed system (mainly the height
of the shunt wire tap) because this will increase the top loading of the
tower quite a lot, making the shunt feed parameters significantly
different.

Your 160-meter signal will probably benefit because of the increased top
loading.

73, de Earl, K6SE
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Topband: KT34 & Shunt Feeding, Earl W Cunningham <=