Topband
[Top] [All Lists]

Topband: Re: [1000mp] FT-1000MP Key Clicks

To: <topband@contesting.com>
Subject: Topband: Re: [1000mp] FT-1000MP Key Clicks
From: W8JI@contesting.com (Tom Rauch)
Date: Thu, 24 Jan 2002 09:24:31 -0500
> > After doing the mod, and using the same setup, the key clicks were
> > reduced to about +/- 800 Hz.

While much better than the clicky ~2.5kHz wide stock FT1000 
series of rigs, it certainly could be much better. 

Just remember even with that mod if you are strong you will have to 
stay at least one kHz from others to avoid bothering weak signals.
 
> Just curious as to "how much space" the older rigs actually
> used also, could you run that test and post the results please ?

Some rigs were fairly good, and some were poor. We should 
remember we didn't have op amps in the early days, and most rigs 
did not have narrow (like 500Hz) filters. Designers could only use 
simple R/C filters for shaping (filtering the bandwidth of the keying 
waveform), and that limits the attenuation of keying harmonics.

Today we easily (and very cheaply) have technology available to 
not occupy more than a few hundred Hz before ALL clicks are into 
the noise, and it will NOT affect how readable our signal is when we 
are weak.
73, Tom W8JI
W8JI@contesting.com 

<Prev in Thread] Current Thread [Next in Thread>
  • Topband: Re: [1000mp] FT-1000MP Key Clicks, Tom Rauch <=