Topband
[Top] [All Lists]

Topband: 2 Element Hybrid with Broadside Capability

To: <topband@contesting.com>
Subject: Topband: 2 Element Hybrid with Broadside Capability
From: w8ji@contesting.com (Tom Rauch)
Date: Wed, 6 Dec 2000 19:26:42 -0500
> Ron, I bought the second 160M Comtek box that Jim built for my pair of
> quarter wave verticals spaced 130' and fed 90 degrees out of phase and
> switchable to in phase

One thing to remember is the dump resistor neither guarantees 
correct phase, nor does it guarantee correct current distribution.

While the Comtek system is a good system, I wouldn't use a 
hybrid system for the second group of directions. Read Lewallen's 
articles on the subject in ARRL publications are a "must read".

There is no resistor anywhere in my four square (and it fires eight 
directions with more gain than a regular four-square).

  
73, Tom W8JI
w8ji@contesting.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com


<Prev in Thread] Current Thread [Next in Thread>