Topband
[Top] [All Lists]

TopBand: verticals

To: <topband@contesting.com>
Subject: TopBand: verticals
From: Peter.Chadwick@gpsemi.com (Peter Chadwick)
Date: Thu, 14 Aug 1997 10:28:40 +0100
> *     I have very good success with a grounded tower fed as a folded
> unipole. It has the advantage that the radiation resistance goes up,
> minimising ground losses.I use a crank up at 60 feet, top loaded with
> a 5 ele for 20, and interlaced 4 eles for 10 and 15 at 68 feet. I feed
> it with 3 parallel wires spaced about 10 inches from each other, and
> bond all the coax outers for the beams top and bottom. An L match
> requires no readjustment over the band on 160, although on 80, it's
> very sharp tuning and runs lots of volts. Adding radials gave no
> change in input impedance ( <1%) and no measurable current in them
> with 400watts and a 250mA thermo ammeter in the radial. This suggest
> that the ground currents are low. The subsoil is heavy wet clay, and
> the grounding is three 4 foot ground rods. It works - VK0IR 2nd call
> on 160, 1st call 80 SSB. I spent a long time trying gamma and omega
> matches until going to the folded unipole approach.
> 
> 73
> 
> Peter G3RZP
> 

--
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com

<Prev in Thread] Current Thread [Next in Thread>