[TenTec] OMNI V

[ROLAND HOWELL <snowy.howell@btinternet.com>]

Hi All
An update on the Omni v, i was lucky enough to get a 81457 pcb from a 
'parted' out radio, that cured the no audio problem, also found a 
trapped wire on the PA section, terminal 1, the white wire, pos volts to 
the relay i believe, cut, soldered and heat shrunk it, sorted.
BUT i still have the button problem, now gravitating towards the 
ULN5818A serial interface, wondering if the shorted wire has corrupted 
something on the logic board.
Unless you can advise otherwise!
Cheers and beers
Snowy