I'd take off the top cover as well as the cover of the time base circuit,
then ONE at a time, remove a connector, sparingly apply DEOXIT to the
exposed pins, and replace the connector, of all connections of the display,
time base circuit, frequency counter, VFO, and peripheral circuits. The
other thing to try is exercise the band switch 10 or 20 times to clean the
contacts.
73 & DX,
Gary - AB9M
-----Original Message-----
From: gary mankoff via TenTec
Sent: Saturday, November 08, 2014 11:40 AM
To: tentec@contesting.com
Subject: [TenTec] (no subject)
CORSAIR 2 PTO CHANGES FREQ BUT NOT ON THE DISPLAY...
TURN RIG OFF THEN ON AND IT LIKE RESETS TO WORK OK ...
VERY INTERMITTENT ...
WHAT SHOULD I LOOK FOR ...
OR IS THE C2 GOING TO GO SOUTH...
73..
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|