Brian,
WHITE - Pin 1 - Audio In
YELLOW - Pin 4 - Audio Out
BLACK - Pin 3 -PTT (Also a good place to connect a straight key or bug or
external keyer,
etc.)
RED - Pin 5 - Spare (This may or may not have any connection ???????)
SHIELD - Pin 2 - Common ground.
I like the flexibility of this arrangement as I can easily connect and
disconnect stuff to my
heart's content. :-)
73,
-Lee-
WA3FIY
On 15 Jul 2014 at 9:45, Brian Carling wrote:
> Thank you. Yes I am going to make adapters for the octopus. Then wire
> it into my present EASY-DIGI interface.
>
> Is there a listing for the color codes and what those 5 plugs function
> as?
>
> Best regards - Bry Carling AF4K
>
>
>
> > On Jul 14, 2014, at 6:52 PM, K8JHR <jrichards@k8jhr.com> wrote:
> >
> > Hi Bry -- do you have the TT 4-output, 7-pin DIN plug "octopus"
> > cable that provides easy connection to the pins of the rear panel
> > accessory jack? If not, a $10 bill and some postage will get you
> > one. That makes connecting a Line In, Line Out, PTT and other
> > connections easy. Check the user manual for the pin out
> > assignments, but the cable that comes from TT will have colors and
> > be easy to mark after you find the chart in the user guide. I
> > cheated and put tape labels on them so I don't get all corn-fused
> > when not looking in the manual.
> >
> > This should point the way.
> >
> > TT makes a buffer or isolation cable, but you should not need that
> > to connect to a well behaved sound card - match an RCA phono plug on
> > one (rig) end and a 3.5 mm TR or TRS jack on the other (sound card)
> > end.
> >
> > I think this is what you are asking.
> >
> > ---------------------JHR -----------------------
> >
> >> On 7/14/2014 3:53 PM, bcarling@cfl.rr.com wrote:
> >> I have a new (to me) OMNI 7 here and I wonder how to go about Sound
> >> Card interfacing?
> >>
> >> Does anyone have experience with this and can shine a little light
> >> for me? The two interfaces I have are designed only for use with a
> >> Yaesu FT857D and a Tentec OMNI VI although I have never used that
> >> one with the OMNI VI due to frequency stability issues, and not
> >> wanting to wait for warm-up... The plugs on the OMNI VI interface
> >> are molded and unfortunately it has too many phono plugs to go to
> >> this OMNI VII. Does anyone know a way to adapt to the OM7 ?
> >>
> >> Thanks & 73 - Brian AF4K
> >>
> >>
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|