If that just came back from the factory I would ship it back up to
them...sounds like a simple alignment issue but it should have been caught in
final checkout before being shipped.
Without some test gear it will be hard to get it right.
Cecil
K5DL
From: John Swartz
Sent: April 27, 2014 5:05 PM
To: tentec@contesting.com
Subject: [TenTec] Omni VI mystery
I ran an on-air test with Jim and found that when using my Omni VI+,
transmitting on 14.052.50, Jim was receiving me at 14.053.11 on his Omni
6. When he transmits, I receive him just fine if I engage the RIT and
listen up 500 Hz, which just about coincides with what his rig is
telling him his transmit frequency is. So, it seems that when he hears
a CQ and answers it, he is actually about 500 Hz higher in frequency
than the guy he is hearing.
I hope this helps diagnose his problem. I'm not savvy enough to know
the fix, other than temporarily engage the RIT or XIT and preset that
500 Hz difference.
73, John WA9AQN
--
John Swartz
Amateur Radio WA9AQN
15076 New Salem Bluff Road
Petersburg, IL 62675
USA
tel 217-632-5925
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|