TenTec
[Top] [All Lists]

Re: [TenTec] Using Non-TT Supply

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Using Non-TT Supply
From: Stuart Rohre <rohre@arlut.utexas.edu>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 28 Aug 2013 14:55:29 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
John,
That much, (5V) of AC on the DC bus all the time is a bad sign. However, are you twisting the red and black VOM test leads to prevent stray AC pickup? You should minimize any different path for the red and black wires to the VOM, by twisting the two as a twisted pair which cancels incidental pickup from other sources.

Electrolytics "may" last 10 years, but it all depends on what temperature rating they had, the temperature of the operating environment, and other factors of wear and tear on the power supply.

Some Ten Tec Radios do not take kindly to having less than 12 volts.
Don't operate the radio with 10.5 volts.

Good Luck, I would say you are due some new capacitors. But check other things, like if all the transistors, (power types) have about the same temperature in the regulation circuit, especially if they are running in parallel. Pertains particularly to Astron supplies.

Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>