TenTec
[Top] [All Lists]

Re: [TenTec] Tuner

To: "tentec@contesting.com" <tentec@contesting.com>, "k9yc@audiosystemsgroup.com" <k9yc@audiosystemsgroup.com>
Subject: Re: [TenTec] Tuner
From: "R. Eric Sluder" <resluder@yahoo.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 9 Jul 2013 17:28:22 -0700 (PDT)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Man... I fell for the Carolina Windom marketing hype and its a windom with the 
22' coax radiator that is then choked and fed with about 110' of coax to an 
Alpha Delta surge device that is connected to ground.  I have another 20' of 
coax that goes from that point to the rig.  Rig is an Eagle.

Its been one of the quietest antenna that I have owned.  I get great signal 
reports on a regular basis running no more than 100 watts.

  I used a homebrew OCF fed in North Texas with a 4:1 voltage balun and a 
common mode choke before entering the shack, and again a pretty quite receive.  
The rig then was a Paragon.

Again, worked many stations around the world with no more than a 100 watts.

Jim, you are a very smart man and I live by your RFI-Ham booklet for noise 
abatement so I'm not questioning your knowledge, but I've had nothing but good 
luck at my stations.

Am I lucky, or... ?  Please advise on how the OCF picks up noise differently 
than a balanced dipole.

73
Eric
W9WLW

Sent from Yahoo! Mail on Android

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>