My Omni VI Plus will not put out any power on 20 Meters. It works fine on all
other bands. When I try to transmit on 20 Meters I get no output power but the
collector current goes to about twice the normal for same output on other
bands.
I have all of the correct voltages for the the relays on the BPF board and the
LPF. Board I can hear the relays or possibly relay clicking on the LPF. Recieve
on 20 is fine. Anyone experience this problem? if so what did you find was the
cause. I suspect one of the 20 m LPF components or one of the 20 m relays. Any
help or guidance would be appreciated.
Thank
Jack WN5A
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|