My Paragon II had the original Dallas chips, despite the rig's age the
internal 3 volt lithium cells were still viable in both of the Dallas
devices. To be proactive, I ordered two replacements from vendors in China.
The SRAM chip was already four years old when I received it... old stock...
The two Dallas RTC time chips had good date codes, but the internal lithium
cells had failed--they both measured 1.80 volts instead of 3.3 volts. If
you decide to replace your Paragon II Dallas chips, I'd suggest ordering
fresh parts from an American vendor or through Ten Tec, if they have.
Adding IC sockets for these two chips might be a good idea for future
replacements. If you're brave, the internal lithium battery has tabs and is
soldered to pins on an internal IC chip; and can be replaced with a bit of
hacking. I'd keep old chips on hand for the day when NOS chips are no
longer made.
Pete
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|