Don, I don't know if you have an antenna analyzer such as the MFJ-259B.
You can use that as frequency counter, connect a coax to it, and a .01
capacitor to the inner conductor of the coax and use that as a probe.
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Don Rasmussen
Sent: Sunday, March 25, 2012 6:13 PM
To: tentec@contesting.com
Subject: Re: [TenTec] OMNI VI+ lost 12m
Thanks Rick, I can probably cheat and set an external receiver w/probe at
the crystal frequency, probably the next course of action.
Re: [TenTec] OMNI VI+ lost 12m
from [Rick - DJ0IP / NJ0IP] [Permanent Link][Original]
Don,
This is another case where a scope would be a real blessing.
You would see in a few seconds whether or not the oscillator were
functioning.
73
Rick, DJ0IP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|