Re: [TenTec] Re. [Ten Tec] Grounds

[Jim Brown <k9yc@audiosystemsgroup.com>]

On 1/25/2012 6:14 AM, Ten-Tec Amateur Radio Sales wrote:
> I use coax braid with ring lugs on the ends.  I bolt all these together
> with a 1/4 20 nut and bolt.  The yellow ring lugs are the ones that I use.

That's a good method.  However -- for gear that is interconnected 
(computer to ham rig), you also want a direct bond from chassis to chassis.

73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec