TenTec
[Top] [All Lists]

Re: [TenTec] Jupiter Autotuner upgrade?

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Jupiter Autotuner upgrade?
From: Stuart Rohre <rohre@arlut.utexas.edu>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 01 Dec 2011 18:20:21 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
John, Some rigs can tolerate up to 3:1 SWR without needing a tuner. 
Usually, there is lowering of power out in such cases but that may not 
affect your signal enough to worry.

The G5RV is best on 20 and 40, band extremes beyond this typically need 
a tuner, but there can be happy coincidence of a fortuitous length of 
feedline transforming a high SWR at the antenna feed point to a usable 
value at the rig.  But also, be aware your SWR measuring instrument may 
not be giving you a reliable result if it is operating into something 
other than 50 ohms, non reactive.  Note what jumpers you have in line, 
and all details in your log book before you change any present 
connections that are allowing you to operate on this band without a 
tuner.  That way, if you do move equipment, change a cable, etc. you can 
get back to this optimized hook up.

-Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>