try MixW2. it works like a charm. the trial version is the actual version
with a time limit. I have found it does the job for me. no interface
required. it works with the cable supplied with the Orion. the cable is set
for stereo. I joined the two audio cables into one for both input and
output. works great.
jack
ak7o
-----Original Message-----
From: Ed
Sent: Sunday, October 30, 2011 3:33 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] CW with O2, Fldigi, and SignaLink
On 10/30/2011 05:12 PM, John K3GHH wrote:
> To those who offered help with my entry into digital modes, thanks... I
> haven't pursued all of your advice yet but thought I'd see if I could
> get the Kubuntu computer to interact with the O2 using CW.
>
> With Fldigi set for OpMode = CW, and "CW" in the little box under the
> frequency window, clicking on "CQ" causes the SignaLink red PTT
> indicator to light, the Orion 2 carrier to come on, "CQ... de K3GHH..."
> to appear in the Fldigi panes (black in the sent pane, red in the
> receive), and the SignaLink relay to click out the Fldigi "CQ..." message.
>
> But the O2 just puts out a steady carrier until Fldigi's "CQ" message
> ends; it's not being keyed.
>
> The Orion CW menu has "PTT in CW as: Key". I wired the SignaLink jumpers
> as the TigerTronics Cables site shows for the Orion and O2: 1 to Mic, 2
> to ground, 3 to PTT, and 4 to Spkr.
>
> What am I missing? I hope the list isn't too long.
>
All modes in fldigi including CW are USB. That may be your problem.
Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|