On 10/30/2011 05:12 PM, John K3GHH wrote:
> To those who offered help with my entry into digital modes, thanks... I
> haven't pursued all of your advice yet but thought I'd see if I could
> get the Kubuntu computer to interact with the O2 using CW.
>
> With Fldigi set for OpMode = CW, and "CW" in the little box under the
> frequency window, clicking on "CQ" causes the SignaLink red PTT
> indicator to light, the Orion 2 carrier to come on, "CQ... de K3GHH..."
> to appear in the Fldigi panes (black in the sent pane, red in the
> receive), and the SignaLink relay to click out the Fldigi "CQ..." message.
>
> But the O2 just puts out a steady carrier until Fldigi's "CQ" message
> ends; it's not being keyed.
>
> The Orion CW menu has "PTT in CW as: Key". I wired the SignaLink jumpers
> as the TigerTronics Cables site shows for the Orion and O2: 1 to Mic, 2
> to ground, 3 to PTT, and 4 to Spkr.
>
> What am I missing? I hope the list isn't too long.
>
All modes in fldigi including CW are USB. That may be your problem.
Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|