On Fri, 2009-12-25 at 09:26 -0500, w1dxh@aol.com wrote:
> can't get radio to talk to computer, settings are 57600 baud,no parity, 8
> data bits, 1 stop it and handshake dtr/rts. dx4win says some radios such as
> tentec and icom require radio address? what does tentec use, can't seem to
> find this info. also want to use n1mm with tentec orion and need to set up.
> any help appreciated, this is all new to me as I never ad m Orion hooked up
> to computer. Thanks and Merry Christmas to all.
>
> 73,
> Steve W1DXH
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
i have been using LOGic8 in Windows and xlog in Ubuntu. neither needs an
address. both read the Orion. 57000 baud, etc are the important info
along with a serial port assignment. if you don't have a serial port a
USB to serial port adapter works fine for LOGic8 and xlog.
Merry Christmas jack ak7o
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|