I'd go ahead and try the Orion with N1MM Logger Steve. There's no
"radio address" that you have to worry about - that was back in the
Omni V days if I'm not mistaken. Make sure you're using a straight
through serial cable and not a null modem (crossover) cable.
73 & happy holidays,
Barry N1EU
On Fri, Dec 25, 2009 at 2:26 PM, <w1dxh@aol.com> wrote:
>
> can't get radio to talk to computer, settings are 57600 baud,no parity, 8
> data bits, 1 stop it and handshake dtr/rts. dx4win says some radios such as
> tentec and icom require radio address? what does tentec use, can't seem to
> find this info. also want to use n1mm with tentec orion and need to set up.
> any help appreciated, this is all new to me as I never ad m Orion hooked up
> to computer. Thanks and Merry Christmas to all.
>
> 73,
> Steve W1DXH
> _______________________________________________
> YCCC Reflector mailto:yccc@contesting.com
> Yankee Clipper Contest Club http://www.yccc.org
> Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|