John Simon skrev:
> I know this question may have been asked before but I can't find any
> reference to the answers.
> My newfound friend, a TT Orion II, is set up for Digital work, ie PSK31,
> RTTY, Packet etc, I have all the correct conections etc and everything seems
> to work. The manual gives little help though in the correct setting for
> digital work through a soundcard. This radio is totally new to me in that I
> can modify any/all settings from A to Z and I'm learning all the time.
> Settings such as AGC, ALC, Audio Gain etc. So if some kind lads would advise
> me on some of their settings I'd appreciate the help.
>
> 73, John de VK2XGJ
> Sometimes I pretend to be normal, but it gets boring.
> So I go back to being me!
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
Hi John, congrats on your new friend! I got mine about 4 weeks ago!
I've designated "User 1" settings for Phone and "User 2" for Digital
modes, that makes for an easy shift from one to the other.
Mostly I work JT65A, WSPR and PSK31 at low power.
I've connected my Soundcard interface (a SignaLink USB) to the "AUX"
connector.
Important settings:
AUX input gain 40
TX Audio Src AUX
Bandwidth 1800
Line Out Src Main
Line Out Level Low
AGC Off
RF Gain 100
ATTN 12dB (normally)
It works very well, with signals in WSPR mode down to -33dB decoded
PWR setting varies but from "1" to "25" mostly.
--
Vy 73 de OZ1PIF/5Q2M, Peter
** CW: Who? Me? You must be joking!! **
email: peter(no-spam-filler)@frenning.dk
http://www.frenning.dk/oz1pif.htm
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|