From a fellow ham in U.K.:
- relay by Stuart, K5KVH-
"snowy.howell@openreach.co.uk wrote:
>
> I have a Ten Tec Corsair 1 (badge KW here in the UK) that has
> a digital readout problem, it shows all 'E,s', I have replaced all of
> the caps on counter and time base board, I have also replaced the
> large counter chip, (at £45) as I was advised by Ten Tec that this
> might be the cause of the problem, still have a problem, the radio
> transmits and receives properly.
>
> I was also advised to change the 2n3866 transistors and 1n4148
> diodes on the board (sorry I am doing this at work so I cant remember
> the board number) that has the frequency change wafers on it, still no
> joy.
>
> Getting frustrated as to the cause so any help from you or the
> Ten Tec users/operators/repairers fraternity will be greatly appreciated.
>
> I can be contacted on this email address or my home one,
> snowy.howell@btinternet.com
>
> Thanks in anticipation
>
> 73
>
> Snowy G0HZE"
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|