Here is the info from 2004 on bending the intake slots:
http://www.tentecwiki.org/doku.php?id=411cooling
Here is N4PY's mod on reducing the fan speed:
http://www.tentecwiki.org/doku.php?id=411cooling2
73,
Alan N5NA
http://www.tentecwiki.org
Duane Calvin wrote:
> The fan is not what is noisy - or at least, is not the root cause of the
> noise. The cause is that close proximity of the intake of the fan to the
> slots on the side of the cabinet. You could try slowing the fan down, or,
> more drastically, cut out the sheet metal of the cabinet side in front of
> the fan intake (cover with hardware cloth or something else to keep you from
> putting your fingers into the fan - it should be as "open" as possible).
> Someone on the reflector took a pliers and "tilted" each of the slots in
> front of the fan - that also might help and would be less intrusive on the
> cabinet. I don't recall how well it worked.
>
> 73, Duane (Centurion - been there, done that!)
>
> Duane Calvin, AC5AA
> Austin, Texas
> www.ac5aa.com
>
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of n5bi@juno.com
> Sent: Wednesday, June 20, 2007 9:28 PM
> To: TenTec@contesting.com
> Subject: [TenTec] (no subject)
>
> Hi Stan,
> I have a Centaur with the typical noisy fan..I have replaced the 811's with
> 572B's and wondered if the 310 fan you show on your lists is the quiet
> replacement for this noisy one I have.
> Thanks for any info. Gary N5BI
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|