Not too clear on what Orion you are running. However, the Orion II running
2.034 and maybe a couple of earlier relases had a problem with the line out
level in the menu. I adjusted it to low and medium and the audio distortion
in the headphones went away. Default was set to high. The problem was fixed
in 2.037j.
So if the shoe fits...keep it.
K0ZU
On 1/28/07, Ron Castro <ronc@sonic.net> wrote:
>
> OK...in that case I would suspect the plug on the headphones is wired
> wrong
> or is defective. Can you test it with other headsets?
>
> Ron N6IE
> www.N6IE.com
> (Formerly N6AHA)
>
> ----- Original Message -----
> From: "Bill Gaines AD8P" <ad8p@wcoil.com>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Sunday, January 28, 2007 4:09 AM
> Subject: [TenTec] Orion Audio Distortion Continued
>
>
> >I did 2 master resets. With the first one I simply replied I wanted to
> >retain the user settings and filters. That did not bring the desired
> >results. In the second master reset I reset the user settings (thankfully
> I
> >wrote them down) and filters. This too DID NOT bring any changes. When I
> >slide the headphone plug into the jack when the first part of the jack
> >connects I have clear audio in one ear. But when I slide the plug all the
> >way in both ears are severely distorted.
> >
> > Any more suggestions I can try before calling Sevierville on Monday?
> >
> > Thanks for the suggestions both on and off list so far.
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|