What mode are you running? If AFSK, how are you creating the shifts?
73, Mike N4NT
----- Original Message -----
From: "joel hallas" <jrhallas@optonline.net>
To: <tentec@contesting.com>
Sent: Sunday, January 28, 2007 8:18 AM
Subject: [TenTec] Paragon Problem -spurs on either side of carrier
> Folks,
>
> I seem to have a new problem with my Paragon. It transmits spurs 600 Hz
> above and below the carrier about 10 to 20 dB down from the carrier.
> This was reported to me by someone using the spectrum scope on an
> SDR-1000. I have confirmed that at least one is there on another
> receiver and the level seems about right. I can also notice the effect
> on strong receive signals. I thought it was them <g>!
>
> I will put it on the spectrum analyzer at work next week, but wondered
> if this is a known problem? I have done the "routine" things like
> tighten all board screws and reseat all connectors and master reset.
>
> Any thoughts?
>
> Thanks!
>
> Joel Hallas, W1ZR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|