Dennis, the mini plug can be used for rig control, when you are using the
301 remote encoder/vfo, which plugs into the DB 25. When I had my Omni 6,
this is how I did it, since I already had a rig control device for an Icom
from W1GEE, which also works with the Omni 6. The 301 plugged into the DB
25, the rig control interface into the mini plug.
73, Mike K9MI
----- Original Message -----
From: "Dennis OConnor" <ad4hk2004@yahoo.com>
To: <tentec@contesting.com>
Sent: Tuesday, January 16, 2007 12 25
Subject: [TenTec] Omni VI serial control
> Carl, what is the point of the mini plug CI-V interface? I have used a
> standard serial cable from a com port to the DB25 on the rear of the Omni
> 6 for years and it works without any interfaces... Am I missing something?
>
> denny / k8do
>
>
> ---------------------------------
> Expecting? Get great news right away with email Auto-Check.
> Try the Yahoo! Mail Beta.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|