Yes, I was looking at that little table of settings the other day
myself and thought: "can't be right, it's a typo" when I saw the psk31
entry. I set the TX EQ to 0dB and power to 100, then adjust the AUX in
for 40 watts or so when sending, staying well below the point where
the ALC indicator becomes active.
Bob NW8L
On 5/7/06, Gary Tuck <gtuck@mac.com> wrote:
> Brand new (one day) to this mode--or in fact any digital mode but
> CW. Using PSK31 Deluxe and a SignaLink SL-1+. Am receiving signals
> fine it seems. Have sound card output (HP laptop) at about 70%. Aux
> Input Gain at 80 in SSB menu. I'm really puzzled about the TX EQ
> setting though. The Orion manual suggests a setting of -14db. This
> setting alone changes the output more than anything else. If I move
> it to a setting of "0" power drops to 5w output. (PWR is set at
> 100) As I adjust the setting to -14db, the power increases to 35w and
> will rise to 75w if I move it further. If I look at the manual,
> this seems rather counter intuitive.
>
> Thoughts or guidance pse??
>
> Gary W7TEA
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|