i found that 40 watts were all one needs to work most any station on PSK31.
following the Orion manual works great most of the time. VOX trip level
about 10%, Anti-Vox about 40%. hang about .4 sec. Aux Input Gain about 60.
TX audio source AUX.
that is where my Orion is set for PSK31
jack ak7o
----- Original Message -----
From: "Gary Tuck" <gtuck@mac.com>
To: "Ten Tec Mailing List" <tentec@contesting.com>
Sent: Sunday, May 07, 2006 6:07 PM
Subject: [TenTec] Orion v2.056 PSK question
> Brand new (one day) to this mode--or in fact any digital mode but
> CW. Using PSK31 Deluxe and a SignaLink SL-1+. Am receiving signals
> fine it seems. Have sound card output (HP laptop) at about 70%. Aux
> Input Gain at 80 in SSB menu. I'm really puzzled about the TX EQ
> setting though. The Orion manual suggests a setting of -14db. This
> setting alone changes the output more than anything else. If I move
> it to a setting of "0" power drops to 5w output. (PWR is set at
> 100) As I adjust the setting to -14db, the power increases to 35w and
> will rise to 75w if I move it further. If I look at the manual,
> this seems rather counter intuitive.
>
> Thoughts or guidance pse??
>
> Gary W7TEA
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|