On 1/19/06, Mike Pagel <k9uw@wi-net.com> wrote:
> JT, I wonder if the noise you're reporting is being generated internally.
I'm wondering myself if the noise is being generated internally as well.
> I assume that power supply is not questionable.
Not sure, I tested it with a volt meter and I'm getting a solid 13.80
volts out but not sure if it is clean or not. Power Supply has been
sitting as long as the rig and not a Ten-Tec supply.
I will probably pop the covers tomorrow and make sure everything is seated well.
Bob, K4TAX wrote:
> Check and exercise the REC antenna switch on the back of the radio.
This is the first thing I checked.
> The S-7 noise is of some concern. Is this with the ATTN depressed or out?
With ATTN out, I am at S7 and depressed it is at S3. I can noise
blank out the noise altogether but I am still unable to hear any
stations.
> Any indication of PLL OUT OF LOCK on the display?
Negative.
> make sure the jumper between the TX OUT and TX EN is in place.
Roger, this jumper is in place.
I may very well need to excercise the relays as you suggest, I'll see
if I can borrow a dummy load from someone.
- JT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|