NZ8J wrote:
> I hooked up my Signal Link SL1+ and used the PTT output on it to key the
> Orion.. everything works fine now... still like to know if the vox is
> supposed to work with the aux input...
> 73
> Tim
> NZ8J
> ----- Original Message -----
> From: "NZ8J" <nz8j@woh.rr.com>
> To: <TenTec@contesting.com>
> Sent: Saturday, November 05, 2005 10:59 AM
> Subject: [TenTec] Does VOX work from the AUX input on the Orion?
>
>
>
>>I'm trying to use the Orion aux input (DIN jack) on the back to work the
>>digital modes, does the vox work like it does on the Argo V or do you need
>>the PTT line activated? I can't seem to get it to key using vox using the
>>aux input.. The same setup on my Argo V works fine using vox. I just
>
> unplug
>
>>it from the Argo V and plug it into the Orion and it won't key.. I have
>
> set
>
>>the input to "aux" and adjusted the input gain, made sure I tried both
>>channels, etc.... but no luck... probably doing something wrong .....any
>>ideas??...
>>Thanks
>>Tim
>>NZ8J
>>
>>
>>_______________________________________________
>>TenTec mailing list
>>TenTec@contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec
>>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
Yes - it does for me
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|