I hooked up my Signal Link SL1+ and used the PTT output on it to key the
Orion.. everything works fine now... still like to know if the vox is
supposed to work with the aux input...
73
Tim
NZ8J
----- Original Message -----
From: "NZ8J" <nz8j@woh.rr.com>
To: <TenTec@contesting.com>
Sent: Saturday, November 05, 2005 10:59 AM
Subject: [TenTec] Does VOX work from the AUX input on the Orion?
> I'm trying to use the Orion aux input (DIN jack) on the back to work the
> digital modes, does the vox work like it does on the Argo V or do you need
> the PTT line activated? I can't seem to get it to key using vox using the
> aux input.. The same setup on my Argo V works fine using vox. I just
unplug
> it from the Argo V and plug it into the Orion and it won't key.. I have
set
> the input to "aux" and adjusted the input gain, made sure I tried both
> channels, etc.... but no luck... probably doing something wrong .....any
> ideas??...
> Thanks
> Tim
> NZ8J
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|