$50 for a WORKING Omni D? That's not a bargain. It's grand larceny.
Invest another couple $ in a manual from T=T - I think they're in stock
and if not I'll make a photo of mine. It's short on bells and whistles,
but hard to beat on RX and TX at any price, especially on CW (and who
needs phone.)
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of Richard Detweiler
Sent: Wednesday, July 20, 2005 10:54 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Old Omni/30 mtrs
Hi Dave,
Congradulations, that is one of the best Radios of the 80s, If
everything
is working properly, it will outperform many of the current $800 radios
today, especially with the optional filters ( which are still
available
and often you see them here on the reflector for 60 or 70 bucks. )
If it does transmit on the other bands, then there is no upgrade path,
(
the upgrade kits are not available anymore ).
Best thing is to enjoy the radio, then when you are ready upgrade.
Best wishes,
Rich
K5SF
>From: "Dave" <frstbaptistchurch@wyoming.com>
>Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>To: tentec@contesting.com
>Subject: [TenTec] Old Omni/30 mtrs
>Date: Wed, 20 Jul 2005 20:36:55 -0600
>
>Hi, am new proud owner of an early Omni D, series B that I picked up
>at WY state convetion for $50..... it has receive only on 30 mtrs..
>nothing in the manual about enabling transmit for 30 mtrs... how do I
>enable 30 mtr xmit?
>thought I would check with the wider family before bothering the
>friends in Sevierville
>
>
>Dave
>K8BBM
>RockSprings, WY
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|