Hi Jerry,
I use the SL-1+ with another rig, (Argonaut-V) and had to change the
settings internal on the SL-1+. Follow the instructions and you will be
able to get the proper signal as desired. Its a great system. I prefer it
over all others since it does not rely on PTT circuitry. As you know it
senses RF and goes to transmit mode automatically. Full-proof and simple!
I work every digital mode with it including CW and it works flawlessly!
Good Luck --- Jim --- N8LUV
On Sun, 16 Jan 2005 13:19:08 -0500 Jerry Schantz
<jschantz@franklinisp.net> writes:
> Hello Group,
> Trying to get my Delta II set up with a SL-1+ , using the accessory
>
> jack. Can not seem to get it to work correctly without over driving
> the
> radio.
> Lowering the level out of the sound card doesn't do much except
> "killing " the keying on the SL-1. It's keyed with a tone level from
> the
> sound card. Have also tried a divider between the interface and
> radio,
> thinking a 100 :1 would work but no luck. Always seems to go into
> ALC
> unless the mic gain is almost reduced to 0. Think I just need more
> reduction of level going into the radio but am sort of frustrated at
>
> this point. Am just not finding the right combo.
> The goal is to be able to use the mic, OR the sound card interface
> with
> out changing mic gain , or other settings.
> Has anyone been here and found the magic combination ??
> Tnx
>
> Jerry W9JJS
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 1/12/05
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|