You hold down the VFO B Lck button while turning on the rig. Look on
the firmware upgrade ( http://www.rfsquared.com/Orion/orionmain.htm )
page under heading
HELP! RADIO SCREEN BLANK AFTER UPDATE. I was getting some quirky
behavior after doing the 1.372 update and even after a master restart,
so I did the Ram-clear and cleared all settings. I then did another
Master Reset and put in all settings again by hand. Everything seemed
to work OK except I've discovered that the Keyer seems stuck in Mode A.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|