TenTec
[Top] [All Lists]

RE: [TenTec] TXCO unit [OT]

To: martin@aa6e.net, tentec@contesting.com
Subject: RE: [TenTec] TXCO unit [OT]
From: "Robert Meuser" <robertm@broadcast.net>
Reply-to: robertm@nyc.rr.com, tentec@contesting.com
Date: Fri, 5 Nov 2004 16:25:00 -0500
List-post: <mailto:tentec@contesting.com>
Phase noise in PLLs is impacted by the VCO as was 
stated and also impart by it's sensitivity, the number of 
millivolts per kilohertz of frequency change. The other 
major factors include loop filter and division ratio. There 
are also various pll design topologies which impact noise 
both directly and indirectly by division ratio. There is quite 
a bit about this in the ARRL handbook and from various 
chip designers such as Analog Devices. AD has a free 
program to calculate phase noise and other PLL 
characteristics for their chips.

R




On 5 Nov 2004, at 12:55, Martin Ewing wrote:

> Cheap PLLs, yes.  A lot depends on the quality of the
> controlled oscillator.  You can use a PLL to steer a
> crystal oscillator (oh so gently), and get minimal
> phase noise.  Effectively, the crystal filters the
> noise sidebands.  It could be a lot better than the
> excellent Orion VFO, for example, which has to work
> over a wide frequency band.
> 
> 73, Martin, AA6E
> 
> p.s. I guess this confirms Dave's later note, FWIW!
> 
> --- David McClafferty <ve1adh@yahoo.ca> wrote:
> 
> > I am only going by what I have experienced and read,
> > PLL's produce more phase noise than xtals
> > oscillators.
> > 
> > Dave, VE1ADH
> > 
> >  --- John Clifford <johnclif@ix.netcom.com> wrote: 
> > > > But why would you want to do it? Changing to a
> > PLL
> > > will 
> > > > increase the phase noise.
> > > 
> > > Are you saying that having PLL control over the
> > BFO
> > > xtals would increase
> > > phase noise? 
> > > 
> > > How?
> > > 
> > >  - jgc
> > > 
> > > John Clifford KD7KGX
> > > 
> > > Elecraft K2 #1678
> > > /KSB2/KIO2/KBT2/KAT2/KNB2/KAF2/KPA100
> > > Ten-Tec Omni VI/Opt1, Centaur, 238B
> > > Alinco DR-605TQ, DJ-V5
> > > Icom T90A
> > > 
> > > IRLP #3978
> > > 
> > > email: kd7kgx@arrl.net
> > > 
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > >
> > http://lists.contesting.com/mailman/listinfo/tentec
> > >  
> > 
> >
> ______________________________________________________________________
> > 
> > Post your free ad now! http://personals.yahoo.ca
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> > 
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>