Just an update,
The RIT/XIT is looking like an intermittent problem. Does not appear to be
related to any other setting as previously thought. Sent email to Dits &
Bits.
73's ... Kip
- http://www.qsl.net/wb3afl/hamrlt.html
- Collinsville Weather:
http://www.qsl.net/wb3afl/wx/display.html
----- Original Message -----
From: "Kip Glunt" <XXXXXXXXXXXX>
To: "tentec-at-contesting.com |TenTec|" <lsithsvltm0t@sneakemail.com>
Sent: Thursday, February 12, 2004 12:34 PM
Subject: Re: [TenTec] RIT/XIT Broken (was: RX/TX Broken in Orion
Version1.369?
...........
Well, the good news! Late last night, while I was playing around
programming the VFO's. RIT/XIT came back! I started with 10 meters and set
a VFO for 29.6 MHz. and set the mode to FM. For some unknown reason I tried
the RIT again, and it was working! Checked all the bands, and all seems
okay! I think I tried every other button on the radio except the mode
button. Go figure!
73's ... Kip
- http://www.qsl.net/wb3afl/hamrlt.html
- Collinsville Weather:
http://www.qsl.net/wb3afl/wx/display.html
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|